.:[Double Click To][Close]:.

Proton Car




Malaysia's primary national car manufacturer has come a long way since the first Mitsubishi-based car rolled off the production line in 1985 and the Proton Impian personifies a new ambition to produce products that are technically advanced, great value and satisfying to drive.

A range of derivative models is currently under development at the R & D Centre, and Proton is also planning the launch of a mid-engined 2+2 sports car based on the Lotus M250 chassis in two years time.

Inner Strength
Thicker steel has been used to reinforce the entire body structure of the new car for maximum rigidity and reduced deformation in collisions. This has also helped to minimise road vibrations and noise transmitted through the suspension mountings.

A recyclable plastic fuel tank module is 15 per cent lighter than in previous Proton models and is designed to withstand a 30 mph rear impact from another vehicle. Modular construction is also used for the doors, front suspension assembly, strut and shock absorber mountings and for brake mountings.

Longer, wider and taller than the Proton Wira, the Proton Impian is also crucially 100 mm longer in the wheelbase. This adds up to more leg, head and shoulder room for added comfort. Spacious accommodation for up to five adults is supported by a wide, easy to load 15.5 cubic feet luggage compartment, which houses a space saving spare wheel and storage tray.

Safe and sure footed
Coil-sprung MacPherson strut front suspension and coil-sprung multilink rear suspension are enhanced by stabiliser bars to create the right balance between precise handling responses transmitted through rack and pinion progressive power steering and ride comfort.

In tuning the spring rates and dampers to achieve this goal, Lotus Engineering conducted exhaustive development work on steering effort and response, linearity, straight-line handling, cornering, lane changing, body control, wheel control and smoothness of ride before the Proton Impian was brought to market. The result is a car that scores eight A's in every facet of ride and handling.

In benchmark tests against such established and acclaimed D sector models as the Audi A4, Honda Accord and Vauxhall Vectra, the Proton Impian established a clear lead in overall ride and handling. With just 2.8 turns from lock to lock, steering response from the alloy wheels shod with 195/55R 15 tyres is direct and positive.

The driver's control of vehicle dynamics is further enhanced by the fitting of traction control as standard equipment to UK-spec cars. Dependable braking over all road surfaces is assured by 10in diameter disc brakes all round, ventilated at the front, plus four-wheel electronic ABS.

Flexible performance
Lower fuel consumption, noise and vibration levels, plus improved flexibility and response are delivered by the latest version of the lightweight Mitsubishi 1.6 litre 4G18 S4 petrol engine fitted to the new model.A plastic intake manifold and redesigned pistons, fuel injectors and distributor have saved space and reduced weight, while a new cooling system, engine stay and cylinder block reinforcement contribute to quieter running.

The four cylinder engine's design features improved cooling and lubrication of the cylinder block. A metal head gasket and wider timing belt ensure even better reliability and consumables such as transmission and engine oil, filters and spark plugs boast extended service intervals.

The new engine delivers increased power and torque than previous 1.6 engines used by Proton for enhanced driveability and economy, while emissions comply with European Step III regulations. Drive is either through a five-speed manual gearbox or optional four-speed electronic automatic transmission.

Safety and comfort
Ergonomic layout of all controls coupled with use of high quality materials in harmonious shades have dictated the design of the new model's passenger compartment. Fascia and seat styling reflects the latest thinking on interior design, with all functions within easy reach and view to help the driver maintain concentration on the road at all times.

Speedometer, tachometer and ancillary gauges monitoring water temperature and fuel level are positioned alongside a warning light panel directly ahead of the driver. Face level fresh air vents are positioned either side of the instrument panel and the driver's view ahead is protected from instrument glare by a stylish curved hood. Below the vents in the strategically-angled centre console are push button controls for secondary functions and a built-in stereo system, which has been ergonomically designed and acoustically tuned by Clarion specially for the Proton Impian.

Controls for the sound system are high mounted in the driver's field of vision to avoid driver distraction and push button controls for volume and station search are incorporated in the 14in. three spoke height adjustable steering wheel, which also houses an electronic driver's airbag.

Primary controls such as headlamps, indicators and wipers/mist washers are mounted on steering column stalks and Proton has even reversed the traditional right side indicator position found on most Pacific rim vehicles to suit European tastes.

Easy to use controls for the standard air conditioning are also to be found in the centre console, which sweeps down to incorporate an ashtray, cigarette lighter, cubby hole, gear shift, handbrake, cup holders and centre armrest concealing a storage bin. Ahead of the front passenger is a fascia-mounted airbag above the large glove compartment and both front seat occupants gain addition impact protection from side airbags.

Body hugging, reclining front seats with adjustable head restraints have 240 mm of fore and aft adjustment, while the driver's seat has hand controls to adjust seat height and lumbar support. Velour upholstery and deep pile carpeting is standard fitment, while the 1.6X is trimmed with Connolly leather upholstery.

Rear seats incorporating vertically adjustable head restraints and a folding central armrest feature 60/40 split and a child seat restraint anchorage. Moulded interior door trim conceals six-piece impact protection that complies with EU side impact safety requirements and windows are electrically powered front and rear.Finger-tip safety-touch controls for all four windows plus child-proof security lock are conveniently located for the driver in the front door armrest, while grab handles above each door and sun visors flush-fold into the moulded headlining.